Home |  My Cart |  My Account | Login

Home > Flasher-Round Base Flashing >  

Zoom

Flasher®-Round Base Flashing

  • The Flasher® is a quick and easy way to flash a penetration coming through a metal roof. The clearly marked diameters on each flashing allow the Flasher® to accommodate a range of sizes. The marked dimensions also allow for easy sizing to fit each individual application.
  • Available in gray EPDM or red Silicone, all flexible materials, the Flasher® is resistant to ultraviolet rays, cracking & weathering.
  • The aluminum base on the upper lip of the Flasher® is corrosion resistant and allows the flashing to conform to any panel configuration and/or roof pitch.
 


 Item # Description/Size Availability Qty Break Price Quantity
MBAFG0310
#1 Flasher-Gray | Fits Pipe Sizes ¼" to 2"
 In Stock 1 $7.70
MBAFS0351
#1 Flasher-Silicone | Fits Pipe Sizes ¼" to 2"
 In Stock 1 $20.16
MBAFG0320
#2 Flasher-Gray | Fits Pipe Sizes 1 ¾" to 3 ¼"
 In Stock 1 $8.88
MBAFS0352
#2 Flasher-Silicone | Fits Pipe Sizes 1 ¾" to 3 ¼"
 In Stock 1 $25.56
MBAFG0330
#3 Flasher-Gray | Fits Pipe Sizes ¼" to 5"
 In Stock 1 $10.16
MBAFS0353
#3 Flasher-Silicone | Fits Pipe Sizes ¼" to 5"
 In Stock 1 $30.00
MBAFG0331
#4 Flasher-Gray | Fits Pipe Sizes 3" to 6 ¼"
 In Stock 1 $15.58
MBAFS0354
#4 Flasher-Silicone | Fits Pipe Sizes 3" to 6 ¼"
 In Stock 1 $47.22
MBAFG0332
#5 Flasher-Gray | Fits Pipe Sizes 4 ¼" to 7 ½"
 In Stock 1 $17.72
MBAFS0355
#5 Flasher-Silicone | Fits Pipe Sizes 4 ¼" to 7 ½"
 In Stock 1 $51.93
MBAFS0356
#6 Flasher-Silicone | Fits Pipe Sizes 5" to 9"
 In Stock 1 $55.09
MBAFG0333
#6 Flasher-Gray | Fits Pipe Sizes 5" to 9"
 In Stock 1 $20.88
MBAFG0334
#7 Flasher-Gray | Fits Pipe Sizes 6" to 11"
 In Stock 1 $27.36
MBAFS0400
#7 Flasher-Silicone | Fits Pipe Sizes 6" to 11"
 In Stock 1 $72.87
MBAFS0401
#8 Flasher-Silicone | Fits Pipe Sizes 7" to 13"
 In Stock 1 $120.76
MBAFG0335
#8 Flasher-Gray | Fits Pipe Sizes 7" to 13"
 In Stock 1 $33.02
MBAFG0337
#9 Flasher-Gray | Fits Pipe Sizes 10" to 19"
 In Stock 1 $71.42
MBAFS0402
#9 Flasher-Silicone | Fits Pipe Sizes 10" to 19"
 In Stock 1 $205.62

Test Type

EPDM

Silicone

Advance ozone resistance test @ 500 pphm

70 Hours

70 Hours

High Temperature:
  Intermittent-
  Continuous-

 
+275ºF
+212ºF

 
+500ºF
+437ºF

Low Temperature:
  Resistance tested to-
  Tensile strength-

 
-65ºF
1,450 psi

 
-100ºF
700 psi

1. Cut to pipe diameter marked on Flasher® (this is approximately 20% smaller than the diameter of the pipe).
2. Slide the Flasher® down the pipe, using water to lubricate if necessary.
3. Form & bend the aluminum base of the Flasher® to fit the surface of the roof.
4. Seal the Flasher® by applying urethane/silicone sealant between the flasher & the roof.  Use a large slot screwdriver to press the base down tightly.
5. Fasten the Flasher® with weather-resistant fasteners to complete the seal.

 

 

Copyright 2010 Protech Products, Inc.